If you want to install the faucet in the kitchen and ensure its normal use, you also need to know the correct installation method. How to install the kitchen faucet?

1. Common faucets: Kitchen faucets are frequently used, and the nuts must be tightened during installation. When installing a single hole kitchen faucet, it is recommended to choose a design where the faucet is fixed with a spiral tube and an enlarged nut, as its stability is relatively high.

2. Installation of thermostatic kitchen faucet: When installing a thermostatic faucet, it is important to remember the principle of left hot and right cold. Do not install the cold and hot water pipes incorrectly, which may cause the faucet to malfunction. It is also worth noting that gas and solar water heaters cannot use thermostatic faucets, and their water pressure is also too low. Remember not to forget to install a cold and hot water filter screen when installing a constant temperature faucet.

3. Installation of single handle kitchen faucets: Each single handle kitchen faucet will have an installation manual, and before installation, it is necessary to check if the accessories are complete. General accessories should be equipped with: a complete set of fixing bolts, fixing copper plates and gaskets; Two water inlet pipes and a complete set of basin lifting and draining devices. Then take out the faucet and pull the handle up, down, left, and right to feel light and comfortable opening and closing, with a slight even and gentle sense of obstruction. Furthermore, it is necessary to check the electroplating surface for brightness, absence of bubbles, spots, and scratches.